Related Manuals for Nice BiDi-WiFi
Summary of Contents for Nice BiDi-WiFi
- Page 1 BiDi-WiFi BiDi-WiFi radio interface EN - Instructions and warnings for the INSTALLER to install and configure Nice control units Instructions for the END USER to control Nice automations for gates and garage doors...
-
Page 2: Table Of Contents
Carefully read all parts of this manual. If in doubt, suspend installation immedi- CONTENTS ately and contact the Nice Technical Assistance. CAUTION! – Important instructions: keep this manual in GENERAL SAFETY WARNINGS AND PRECAUTIONS ..2 a safe place to enable future product maintenance and PRODUCT DESCRIPTION. -
Page 3: Product Description
PRODUCT DESCRIPTION PRODUCT DESCRIPTION The BiDi-WiFi accessory is a device that – by means of WiFi communica- tion – allows for controlling the movement and status of Gate&Door-type RJ11 Nice automations compatible with the BusT4. CAUTION! – Any use other than that specified herein or in... -
Page 4: Mynice Pro" Configuration For The Installer
– power the automation’s control unit (“Figure 6") LED SIGNALS In the event of BiDi-WiFi malfunctions, the LEDs (A) and (D) can light up or start flashing. (“Figure 10"). – wait for the WiFi LED (A) to start flashing (“Figure 7") The “Table 1” shows the meanings of the LED signals. -
Page 5: Reset
– press and hold the RESET button (P1) for at least 3 seconds: all the at any time when deemed necessary, without altering its LEDs will flash green functions and intended use. – release the RESET button (P1). BiDi-WiFi will restart waiting for a new WiFi configuration (“Figure 11"). Table 2 TECHNICAL SPECIFICATIONS... - Page 6 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...