Product Description And Intended Use - Nice O-Box Operation Instructions And Warnings

ENGLISH
SOFTWARE USER'S LICENSE
The programs "O-Box Software Desktop" and "O-Box Software Mobile" are
protected by the laws of copyright and intellectual property; these software
applications are not sold, but are license-granted for non-exclusive use. Nice
s.p.a. remains proprietor of this program copy. The programs "O-Box Software
Desktop" and "O-Box Software Mobile" are license-granted as products com-
bined with the product "O-Box".
These software programs are supplied without guarantees regarding use and
safety. Furthermore, Nice s.p.a. shall not be held responsible for direct or indi-
rect damages due to loss of profit, interruptions to work and similar, caused by
incorrect use of these software applications
TRADEMARK INFORMATION
The names AMD ® , INTEL ® , BLUETOOTH
registered trademarks of the respective owners; the products names stated in
this manual may also be registered by the respective owners.
GENERAL NOTES ON THE MANUAL
There are two programming unit models available: O-Box and
O-BoxB. These models are identical with the only difference on
the model O-BoxB, of a module for connection by Bluetooth
In this manual, the term "O-Box" is used to refer to both
product models, unless otherwise specified.
® , WINDOWS ® , and MICROSOFT ®
® .
1 PRODUCT DESCRIPTION AND
INTENDED USE
The product O-Box (or O-BoxB, version with Bluetooth
programming unit and dedicated software. The combination of these two ele-
ments is designed for the programming and maintenance of data and parame-
ters of devices used for the automation of gates, garage doors, sun awnings,
shutters, road barriers with mobile arms and similar applications.
Any other use is to be considered improper! The manufacturer declines all
liability for damage resulting from improper use of the product and other
than as specified in this manual.
O-Box and the "NiceOpera" system
O-Box is a device that belongs to the system "NiceOpera". This system has
been designed by Nice to simplify the phases of programming, use and main-
tenance of the devices in automation systems. The system is made up of vari-
are ous devices, both software and hardware, able to exchange data and informa-
tion via radio, by means of an encoding system named "O-Code" or a physical
cable connection.
The main system devices are:
– NiceOne transmitters;
– NiceOne receivers (family OXI... ; family OX...);
– O-Box programming unit;
– control units and gearmotors with "Bus T4";
– O-View programmer for devices with "Bus T4".
IMPORTANT – For detailed information on all functionalities of the Nice-
Opera system and interdependency of the various system devices, refer
to the general manual "NiceOpera System Book", also available on the
website www.niceforyou.com
Main operating characteristics of O-Box
Use of O-Box is especially recommended on automation systems with a high
technological content, as it enables the installer to perform many functions
directly from the office, without the need to visit the client's premises; it also
enables configuration of a system directly on-site.
) comprises a
® module
English – 1