Nice O-Box Operation Instructions And Warnings page 14

J Advanced settings
- Enable Repeater: this function enables code repetition. If there is the need
for remote control of an automation from a distance greater than that normal-
ly covered by the transmitter and receiver, a second receiver may be used
with the task of re-transmitting via radio the command to the end receiver (in
which the identity code is memorised of the transmitter that sent the com-
mand) to that the latter can execute the command.
- Enable key release management: during use of a transmitter, after send-
ing a command, the manoeuvre does not stop precisely on release of the key
but proceeds briefly for a set time interval. If required, the manoeuvre can be
interrupted immediately on release of the transmitter key (e.g. during fine tun-
ing operations) by enabling this function on the receiver.
- Disable priority management: this function enables the user to disable
reception on a receiver of commands sent by transmitters with priority
greater than 0.
Note – For more information on use of all functions described, refer to the man-
ual "Nice Opera System Book".
• Change Password: this function enables the entry of a password to restrict
access, also manual, to all functions of a receiver, by those not in possession of
this password.
12 – English
3.5 – SYSTEMS AREA
The Systems section is a database that enables the creation and storage, for
each system, of an analytical datasheet summarising the client's information
and settings of the receivers installed in the relative system. In particular there is
the option to modify systems, display codes, settings and save data of the
receivers installed, and in the event of malfunction enables restoral of automa-
tion operation.
This section is made up of two windows:
– a quick search function and selection of stored systems;
– another window containing a datasheet for collection of data related to a sin-
gle system.
To access the Systems section, proceed as follows:
01. In the home page (fig. 3) click on the icon "Systems".
02. An initial window is displayed (fig. 10) for managing stored systems. This
comprises the following items:
• Browser bar with the following functions:
J "Modify": enables modifications to system data.
J "New system": enables the creation of a new system.
J "Copy": enables copying of data from an existing system to create a
new identical version.
J "Delete": enables the user to delete one or more systems.
• The area "Filter on data" to enable simple and fast searches of stored
systems.
• The area "Systems List" showing the list of stored systems.
03. At this point, on selection of one of the following functions: "Modify", "New
system" and "Copy", a second window is displayed (fig. 11) with the
datasheet of the specific system. This comprises the following items.
• Browser bar with the following functions:
J "Work on this system": enables work on a new or existing system
(refer to paragraph 3.5.1).
J Save to file: enables the user to save data of receivers to be memo-
rised on other files.