Table Of Contents; Important Notes - PAX S300 Manual
Emv certified pinpad with heartland payment processing by pcamerica
Hide thumbs
Also See for S300:
- User manual (194 pages) ,
- Manual (19 pages) ,
- Quick reference manual (4 pages)
Table of Contents
Advertisement
Table of Contents
Installing the Hardware for standalone TCP/IP
Installing the Hardware for TCP/IP and Serial connections
Installing the Hardware for TCP/IP and Serial with the C2G USB adapter
Installing and configuring the C2G USB adapter and driver
Configuring the Communications Port for standalone TCP/IP connections
Configuring The Pax With A Static Ip Address (required for standalone TCP/IP connection)
Configuring the Communications Port for a Serial connection
Setting the Debit Prompt to OFF
Performing a Manual Entry Sale
Getting the IP, Subnet Mask, Gateway IP, and DNS IP
Important Notes – Please Read!
CRE must be on version 12.70021 or higher to use the PAX device and 12.70110 or higher for
serial communications support.
Only Heartland payment processing is currently certified and supported for this device.
Each PAX device needs its own wired internet connection (unique IP address). It cannot use the
same internet cable connected to the PC. Prior to installation, make sure there are enough
additional internet connections for each PAX device you will be installing.
Each register running card transactions must have its own PAX device; PAX devices may not be
shared among registers.
Credit card settlements must be done in CRE on every station where a PAX device is connected.
The PAX device must have settings pre-configured and installed by your payment processor prior
to integration with CRE.
Auto-settlement is NOT recommended if taking tips on the PAX.
2 |
P a g e
Hide quick links:
Advertisement
Table of Contents
