Tcp/Ip Connection; 9-Pin Serial Connection With C2G Serial To Usb Adapter - PAX S300 Manual

TCP/IP connection and 9-pin serial connection with C2G Serial to USB adapter
1. Locate the Cables to Go serial
to USB adapter; Model:
26886; UPC-A: 757120268864.
2. Connect the 9-pin adapter to
the 9-hole adapter on the
Serial cable.
3. This is what your set up should
look like when everything is
properly connected.
Make sure to install the
PL2303 Prolific Driver prior to
connecting the USB interface
to the PC.
8 | P a g e