PAX D190 - Mobile Payment Terminal Quick Setup Guide
![]()
Contents Checklist
Please check the components after unpacking. If any components are missing, please contact the dealer.
Name | Qty. |
D190 Mobile payment terminal | 1 |
AC Power Adapter | 1 |
USB Cable | 1 |
Battery | 1 |
Quick Setup Guide | 1 |
Product Description
Note: Product images shown may be different than actual product received.
![PAX - D190 - Product Description - Part 1 Product Description - Part 1]()
![PAX - D190 - Product Description - Part 2 Product Description - Part 2]()
Power
Power on: Plug in power adapter or insert the battery, Press
button for 3 seconds until the PAX LOGO displays on LCD.
- Red indicator: Device is charging
- Green indicator: Charging is complete
- Red and green indicators flashing alternately: Charging problem Power off: Press
button for 3 seconds until the "Power off " displays on the LCD screen, then press "ENTER". The POS terminal is being turned off.
Card Readers
- Magnetic stripe card: Place the magnetic stripe face up. Keep the magnetic stripe card perpendicular to the main display. Swipe card through the magnetic card slot at a constant speed.
- IC card: Place the IC chip face up. Insert the IC card into the card slot and push it to the end.
- Contactless card: Put the contactless card on the center of the payment module screen.
SAM/SIM Card
The default hardware configuration only supports SIM1 slot. To insert SAM/SIM card, remove the battery cover, remove the battery, insert the SAM/SIM card to the corresponding card slot, replace the battery and the battery cover.
Battery:
Align battery tip side to battery tip in terminal when inserting the battery.
![PAX - D190 - Inserting the SAM/SIM Card Inserting the SAM/SIM Card]()
Environment
Working Environment:
Temperature: 0℃ ~ 50℃ (32℉ ~ 122℉)
Humidity: 10% ~ 93% (non-condensing)
Storage Environment:
Temperature: -20℃ ~ 70℃ (-4℉ ~ 158℉)
Humidity.:5% ~ 95% (non-condense)
Device Location
Locate the device on a countertop, desktop, or tabletop. Keep the device away from direct sunlight, excessive dust, moisture, and heat.
Avoid locating the device near electrical devices that might introduce interference such as microwave ovens and blow dryers.
Cleaning the Device
![]()
- Do not use industrial strength or abrasive cleaner as it may damage or scratch the screen.
- Do not immerse terminal in water or liquid.
- Do not spray water or cleaner into card reader or ports.
- To clean screen, apply distilled water or mild glass cleaner onto a soft, lint-free cloth and gently wipe screen.
- To clean device, apply distilled water or plastic-safe cleaner onto a soft, lint-free cloth and wipe gently.
Installation and Usage Tips
- Avoid exposing the device to an excessively hot, humid, dusty, or strong electromagnetic environment.
- Do not vibrate, shake, or drop the device.
- Do not plug or unplug any part of the device while it is powered on.
- This may cause damage to the internal circuit.
- There is a risk of explosion if the battery is replaced with an incorrect type.
- Please contact PAX technical support for assistance with the device.
Lithium Ion Battery Usage Tips
![]()
- Do not use the battery in direct sunlight or in smoky or dusty environments.
- Do not crush the battery or expose it to liquid or fire.
- Discontinue use if the battery is damaged.
- Only use the original battery and charger for the terminal and replace the battery when the battery life begins to decline. Contact your distributor for assistance replacing the battery.
- Overcharging the terminal can degrade the battery. Do not over-use the battery or charge the battery longer than 24 hours.
- If the battery is not used often, please recharge the battery every 6 months to avoid shortening the life of the battery.
- For best performance, it is recommended to replace the battery every 2 years.
- Dispose of used batteries properly.
Icon shows
![]() | Do not throw away, need professional recycling. |
![]() | Class II Equipment |
![]() | For indoor use only |
![]() | Energy Efficiency Marking |
![]() | AC voltage |
![]() | DC voltage |
The MAINS plug is used as the disconnected device.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.pax.com.cn/ProductCE.aspx
![]()
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download PAX D190 - Mobile Payment Terminal Quick Setup Guide
Need help?
Do you have a question about the D190 and is the answer not in the manual?
Questions and answers