Installation Checklist - VESDA LaserSCANNER VLS-200 Installation Manual

VESDA ®

9. Installation Checklist

Site Name: .................................................................................
Zone: .........................................................................................
Detector Serial Number/s: ............................................................
Perform the following checks listed below to ensure that all the necessary items are
completed before handing over to a commissioning engineer.
INSTALLATION CHECKS
1. Was the LaserSCANNER detector intact in the box?
2. Is the LaserSCANNER securely locked onto its mounting
bracket?
3. Are the sampling air pipes firmly connected to the air inlet ports?
Note- The pipes must not be glued.
4. Have the power wires been connected to the correct terminals
on the termination card?
5. Have the alarm signalling wires been terminated to the correct
terminals on the termination card?
6. Have the VESDAnet wires been connected to the correct
terminals on the termination card?
7. Has the plug at the exhaust port been removed and the exhaust
pipe (if fitted) not glued?
8. Has the front cover been replaced correctly?
9. Have the Preliminary System Checks been performed?
10. Is the air sampling pipework installed and checked as per the
site plans?
Installation of your LaserSCANNER is now complete.
Name of Installer: .........................................................................
Signature: ................................................................................................
Date: ..........................................................................................
Version 1.3
LaserSCANNER Installation Manual
Yes No
23