General Description; Scope Of Delivery; Functional Description; Overview - FLORABEST FTS 1100 B2 Translation Of Original Operation Manual

equipment and represent a serious risk for
the user.
The pump is not suitable for continuous
operation. Continuous operation reduces
the durability and shortens the guarantee
period.
The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer shall not be liable for
damages caused by use other than for
which the equipment is intended or by in-
correct operation.

General Description

The diagram of the most important
functional elements can be found
on the foldout side.

Scope of Delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Fully assembled dirty water submersible
pump
- Angle adapter
- Reducer
- 8 m nylon cord
- Instruction Manual

Functional description

The dirty water submersible pump has a
stainless steel casing, a stable suction foot
and a non-corrosive motor shaft. The pump
is fitted with a float switch, which automati-
cally switches the equipment on or off.
The motor is protected from overload by a
thermal safety switch.
Please refer to the following descriptions for
the function of the operating parts.

Overview

1 Round handle
2 Pump housing
3 Pump outlet
4 Floor plate
5 Foot part
6 Mains connection cable
7 Float switch
8 Float switch grating
9 Reducer
10 Angle adapter
11 8 m nylon cord

Technical Data

Dirty water submersible pump FTS 1100 B2
Rated voltage ..................... 230 V~50 Hz
Rated power input/
Power consumption ..................... 1100 W
Max. discharge rate (Q max) .... 20000 l/h
Max. discharge head (H max) ............. 8 m
Max. depth of immersion .................... 8 m
Max. water temperature (T max) ....... 35 °C
Hose connection ................ 1", 1¼ ", 1½ "
Max. foreign body size ..................35 mm
Switching point level:
ON ............................ approx. 520 mm
OFF ........................... approx. 230 mm
Mains cable .................................... 10 m
Weight ......................................... 6.6 kg
Safety class ............................................ I
Degree of protection ......................... IPX8
Technical and optical changes can be car-
ried out in the course of further development
without notice. All dimensions, references
and information of this instruction manual
are without guarantee. Legal claims, which
are made on the basis of the instruction man-
ual, cannot thus be considered as valid.
The maximum performance data are meas-
ured with a straight, direct outlet flow. The
angle piece and backflow valve may reduce
performance.
GB
5