Table Of Contents; Introduction; Areas Of Application - FLORABEST FTS 1100 B2 Translation Of Original Operation Manual

GB
Content
Introduction .................................4
Areas of Application ....................4
General Description ......................5
Scope of Delivery............................ 5
Functional description ...................... 5
Overview ....................................... 5
Technical Data ..............................5
Performance data ............................ 6
Notes on Safety ...........................6
Symbols on the equipment ............... 6
Symbols in the manual ..................... 6
General notes on safety ................... 6
Initial Operation ...........................8
Positioning/Hanging ....................... 8
Mains Connection ........................... 8
Connecting the Pressure Line ............. 8
Adjustment of the float switch .......... 9
Operational start-up ........................ 9
Cleaning/Maintenance/Storage ..10
General cleaning instructions .......... 10
Cleaning the Fan Wheel ................ 10
Storage........................................ 10
Waste Disposal and Environ-
mental Protection .......................10
Guarantee .................................11
Repair Service ............................12
Service-Center ............................12
Importer ....................................12
Troubleshooting .........................13
Replacement parts/Accessories ..13
Translation of the original EC
declaration of conformity ........... 68
4

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has been
checked for quality and subjected to a final
inspection. The functionality of your equip-
ment is therefore guaranteed. It cannot be
ruled out that residual quantities of water
or lubricants will remain on or in the equip-
ment/hose lines in isolated cases. This is not
a fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Areas of Application

The dirty water submersible pump is a
drainage pump and designed for transport-
ing water and sewage water (max. particle
size 35 mm) up to a temperature of max.
35 °C.
It is suitable e.g. for pumping around and
pumping out basins and containers, for
pumping out flooded cellars, and for ex-
tracting water from wells and shafts.
This equipment is not suitable for industrial
use. Industrial use will invalidate the guar-
antee.
Any other use, not expressly authorised in
these instructions, may cause damage to the