Cleaning/Maintenance/Storage; General Cleaning Instructions; Cleaning The Fan Wheel; Storage - FLORABEST FTS 1100 B2 Translation Of Original Operation Manual

GB
sure that the plug socket is suf-
ficiently fused (at least 6 A, RCD
switch). Insert the pump plug into
the plug socket and the pump is
ready for operation.
• Make sure that moisture or water
never come in contact with the
mains connection. There is a risk
of electrocution.
Cleaning/Maintenance/

Storage

Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. This will prevent damage to
the equipment and any resulting per-
sonal injury.
Pull out the power plug before every
maintenance operation. There is a
risk of electrocution or of injury from
moving parts.

General cleaning instructions

• In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every
use.
• In case of stationary installation, the
function of the float switch (
be checked regularly (at the latest every
three months).
• With a water jet, remove fluff and
fibrous particles which are possibly pre-
sent in the pump casing
• Regularly remove sludge from the pit
base (at the latest every 3 months) and
10
also clean the shaft walls
• Clean precipitation from the float switch
with clear water,
• In the case of a long period of non-use,
the pump must be thoroughly cleaned
after the last use and before the new
use, since difficulties in start-up can
arise due to precipitation and residues.

Cleaning the Fan Wheel

In case of soiling or blockage of the impel-
ler, this can be cleaned via the pump outlet
(3) or by removing the floor plate (4):
1. Unscrew the bracket adapter
2. Remove the 3 screws on the bot-
3. Clean the fan wheel using clean
4. To re-assemble, reverse this order.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.
Storage
• Keep the equipment clean, dry and out
of the reach of children.
• Unscrew the bracket adapter (
7) is to for storage.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
( 10) from the pump outlet
( 3).
tom of the base (5) and take off
the base plate (4).
water.
10)