Table of Contents
Advertisement
Available languages
Available languages
•
Never carry out any maintenance while the engine (3) is running.
•
Use the tool only for the purposes indicated in paragraph 3.2. Any other use may result in personal injury.
•
Fill the tank only when far away from heat sources.
•
Never smoke while refuelling.
•
Do not take the tank plug (15) off the tank while the engine (3) is running.
•
Be careful when refuelling. Do not spill fuel on the ground or on the engine (3). If fuel flows out while refuel-
ling, move the tool to another place before starting it.
•
Do not use fuel (mixture) to clean.
•
Never check the plug sparking near the cylinder hole.
•
Never work with a damaged muffler (31).
•
Always keep the handgrips (5) and (17) clean from oil and fuel and dry.
•
Store the tool in a dry room, away from heat sources and keep it off the ground.
•
Inspect the tool on a daily basis to assure all the devices are operative.
•
Never perform any operations or repairs that are not considered routine maintenance jobs. Contact author-
ized service centres.
2.2
Use
•
Always hold the tool with both hands and make sure you are in a steady and safe work position.
•
Use the tool only for the purposes indicated in paragraph 3.2. Any other use may result in personal injury
WARNING!
Accelerating on the same spot on the branch for a long time does not favour fruits harvesting. Change the hook
position and repeat the shaking operation.
2.3
Maintenance
WARNING!
Before performing any maintenance operations or adjustments on the mechanical parts of the equipment, put on
heavy-duty work shoes, protective gloves and goggles.
•
Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifications.
•
Special maintenance and repairs can be carried out only by a qualified mechanic.
•
Before any maintenance or adjustment operations, disconnect the tool from its power source.
•
Keep bystanders away when servicing or repairing the machine.
•
Only qualified mechanics are authorised to inactivate the safety devices provided on the machine when maintenance
is to be performed. It is their responsibility to safeguard the operators and the machine. The safety devices should be
activated as soon as maintenance work has been completed.
•
All maintenance procedures not dealt with in this manual are to be performed at CAMPAGNOLA Authorised Service
Points.
•
When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified mechanic. The service mechanic must make sure:
-
work has been completed;
-
the machine runs in a trouble-free manner;
-
the safety devices are activated;
-
no one is working on the machine.
3 SPECIFICATIONS
3.1
Product identification
The tool identification details are indicated on the plate (1).
3.2
Product description
The engine-driven hook shaker is a tool which has been specifically designed and manufactured for olive harvesting.
However, it may be used to harvest pistachio nuts, almonds, coffee beans and jam fruit, too.
The hook (22) is operated by a two-stroke engine (3) that transmits motion through the crown-wheel-and-pinion system.
The tool is equipped with a device which notably lowers the vibrations received by the operator without however compro-
mising the tool operation.
WARNING!
The hook shaker has been designed and manufactured for the only purpose of shaking branches.
Use and Maintenance Manual – Original
Instructions Rev.: 04, Date 20/06/2018
Page 21
Advertisement
Chapters
Table of Contents
