Introduction; Reading The Use & Maintenance Manual; Symbols And Operators' Competence Levels; Compliance Certificate - CAMPAGNOLA LIPO 550 Use And Maintenance Manual

1. INTRODUCTION

1.1 Reading the Use & Maintenance Manual
Before working on the equipment, carefully read and understand this Use & Maintenance Manual in order to
safeguard the operator and to avoid damaging the machine.
These instructions describe how to operate the equipment safely, economically and in compliance with the
current safety regulations. Following these instructions helps avoid dangerous situations, reduces repair costs
and down-time and extends the life-span of the machine.
This manual is to be kept legible and in good condition. The operating and maintenance staff must have it at
hand, so that it can be read whenever needed.

Symbols and operators' competence levels

1.2
All operations herein described must be performed by qualified personnel and in compliance with the
Manufacturer‟s manual. Each procedure is accompanied by an icon which indicates the necessary operator‟s
qualification. The indication to identify the personnel qualifications are given below.
Operator
Personnel who can install, operate, adjust, clean, repair, transport the equipment and carry out its routine
maintenance.
Qualified mechanic
Personnel with mechanic competences, capable of installing, servicing and/or repairing the product and of
operating it even when all its safety devices are partially or totally off. He cannot carry out interventions on the
electric/electronic system.
Qualified electrician
Personnel with electric/electronic competences, capable of installing, servicing and/or repairing the
product and of operating it even when all its safety devices are partially or totally off. He cannot carry
out interventions on the mechanical system
AUTHORISED SERVICE POINTS
Centres, indicated by the Sales Staff of the Manufacturer, authorised to repair the products.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
IMPORTANT!
Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance
with the current safety regulations.
1.3

Compliance certificate

All the products marketed in the European Union (EU) must fully comply with the European Council Directive
2006/42/CE. The compliance certificate is supplied by the Manufacturer with the Use & Maintenance Manual.
1.4

Receiving the product

When receiving the product, make sure:
•
the product has not been damaged during transport;
the product supplied matches with the order. Check that all parts have been delivered (refer to "Product
•
Description", "Specifications" chapter). If problems arise, please contact the Manufacturer‟s Service
Department quoting all details indicated on the nameplate (refer to "Product Identification", "Specifications"
chapter).
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Rev.: 02, Date: 03/11/2016
Pag.23