Non-Volatile Memory - Keysight X-Series Security Features And Document Of Volatility

Instrument Memory & Volatility

Non-Volatile Memory

Non-Volatile Memory
This section contains information on the memory components available in your
instrument.
The table provides details of the size of each memory component, its type, how
it is used, its location, volatility, and the sanitization procedure.
N O T E
The instrument contains no user-accessible non-volatile memory, except for
the Disk Drive described in Item 17 of
in the tables below, no sanitization procedure is required for any memory
component except the Disk Drive.
Table 4-1 Summary of Non-Volatile instrument memory
Memory
Component,
Type and Size
1. Front Panel No
EEPROM
64 kbit
2. EDID Memory No
2 kbit EEPROM
3. Config & Cal No
Memory
8 kbit EEPROM
4. Config & Cal No
Memory
8 kbit EEPROM
Security Features and Document of Volatility
Purpose/Contents
Yes Contains software for
running front panel
microcontroller. Operates
front panel LEDs, and
transmits key presses to
processor.
Yes Extended Display
Identification Data.
Contains basic
information about a
monitor and its
capabilities.
Yes Header EEPROM used to
identify the assembly.
Yes Header EEPROM used to
identify the assembly.
Table 4-1. For this reason, as indicated
Data Input Method Location in
Instrument and
Remarks
Programmed A1A2 Front
before installation. Panel Interface
Board
Contains no
user data.
Programmed A1A2 Front
before installation. Panel Interface
Board.
Contains no
user data.
Programmed A2 Analog IF
before installation. Assy.
Contains no
user data.
Programmed A3 Digital IF
before installation. Assy.
Contains no
user data.
Sanitization
Procedure
None
None
None
None
11