Sd Memory Card - Keysight X-Series Security Features And Document Of Volatility

User and Remote Interface Security Measures

SD Memory Card

2. To log off, click the Windows Start button, then select Shut down > Log off from
Figure 8-1 Windows Log off Control
3. After you have logged on to the instrument as the Administrator, restart the Keysight
4. When the XSA application has fully initialized (that is, when the main results view and
5. From the System softkey menu, select: More > Security > USB.
6. Select the option Read Only.
7. To activate the configuration change, either log out and then back in under your usual
SD Memory Card
The SD Memory Card can either be write protected, or removed from the
instrument.
— To remove the SD Memory Card, follow the instructions in
— To write protect the SD Memory Card, first remove it from the instrument, as
Write protecting or removing the SD Memory Card does not interfere with
normal operation of the instrument operating system or the instrument
application software.
Security Features and Document of Volatility
the Windows Start menu, as shown in
XSA application.
softkey menu are visible), press the System front-panel key.
user name (which by default is "instrument"), or cycle the instrument power.
Card Removal Procedure" on page
above. The SD Memory Card features a Lock switch that, when set, prevents
the writing of data to the card.
Figure 8-1 below.
30.
"SD Memory
34