Table of Contents
Advertisement
6. System Operation
Be sure to mute the audio signal of a mixer or ampli er before turning on the receiver and
transmi er.
(1) Power on
Turn AF level on the receiver completely counter-clockwise to the minimum level, and switch
on the receiver. As soon as you turn power
red, meanwhile the RF
operating.
2
3
It is always a good idea to keep "open space" between transmi er and receiver, that will improve
RF reception.
(2) Selecting channel for the receiver and transmi er
1. Use the supplied screwdriver to select a desired channel for the receiver
Both receiver and transmi ers are preprogrammed with 16 channels.
2. Make sure the channel of receiver matches that of the transmi er.
3. When 2 or more system are being used in the same location, they must be set up to use
di erent channels. If existing channel is being interfered, please change to another
non-interference channel.
11
MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
5
signal and AF
5
6
4
of the receiver on, the power LED
2
LED light up to indicate the system is ready for
6
PLL SINGLE CHANNEL DIVERSITY RECEIVER
UR-816DB
4
3
lights
2
5
VOL.
RF
POWER
CH
9
13
AF
MIN.
MAX.
6
and transmi ers .
4
4
.
Advertisement
Table of Contents
