Table of Contents
Advertisement
7. Rack Mounting
(1) Before mount receivers onto DR-900 rack adaptor, please release any cables from the rear of the
receiver.
(2) Turn over receiver and DR-900 rack adaptor simultaneously, there are 4 threaded holes at the
bo om of receiver and rack adaptor for inserting screws.
(3) Single receiver
Insert in a receiver through the front of DR-900 until it is rmly a ached to the rack, then screw
on a RP-900 to another side of the rack.
(4) Dual receivers
e same way as above, put one receiver to each rack space.
12
Advertisement
Table of Contents
