Table of Contents
Advertisement
Section 8
Parameter & Settings Adjustments using the Display & Keypad
Installers can access parameters on the AWRT10RF using the SALUS Smart Home application if an
SG888ZB Gateway is used and connected to the internet . Alternatively, the parameters may be
entered directly through the display and keypad on the AWRT10RF Thermostat . The following
procedure outlines parameter adjustments using the keypad . Changes made on the SALUS Smart
Home application or on the AWRT10RF Thermostat may take a few minutes to go into effect .
Before starting setup procedures, press any key to light the display and prepare the AWRT
Thermostat for input .
Settings: Press the
to enter settings menu .
Available settings are
shown on the Settings
Chart . Use the
or
keys to scroll through
available settings .
Generally, once in settings or parameter setup mode, use
parameters, and
and
The table on the following page titled "AWRT10RF Wireless Radiant Thermostat Settings" lists the
settings available from the thermostat screen and keypad .
Scheduling functions with date and time are OFF as default for the AWRT Thermostat.
To enable the time & date display, choose S11 and push the
(holding the
to P02 and choose YES to enable the scheduling function.
AWRT10RF Thermostat Settings & Parameters
Time/Date Functions: If
key
S 02 through S 10 are not
accessible, change the
S 11 value to "49" on the
display using the
keys and press enter .
Change item P02 to YES
to enable thermostat
programming .
to change setting or parameter values . Use SELECT to confirm changes .
or
key will increment/decrement by 10). Use the
Reset to Factory
Settings: To reset the
AWRT10RF Thermostat to
factory settings, change
or
the S 11 value to "86" and
choose "Y" to reset .
and
to move between settings and
key until 49 is displayed
and
keys to go
8 .1
Hide quick links:
Advertisement
Table of Contents
