Awrt10Rf Wireless Radiant Thermostat Operation; Setting The Hvac Mode Using The Display & Keypad; Changing The Temperature Setpoint In Non-Programmable Mode - Salus AX10RF System Manual

Section 9
Setting the HVAC Mode using the Display & Keypad
Step 1. Press any key on the
keypad to activate the backlit
display preparing it for input .
Press the or key to toggle
between HVAC Modes (HEAT/
COOL/OFF) .
Changing the Temperature Setpoint in
Non-programmable Mode
Step 1. Press any key on the
keypad to activate the backlit
display to prepare for input .
Press the or key to
adjust the target temperature
AWRT10RF Wireless Radiant
Thermostat Operation
The new mode setting
will flash and the current
setpoint temperature will
appear above the room
temperature display . If the
mode is OFF, the setpoint
will change to 41°F (5°C) .
The positions of the setpoint
temperature and the current
room temperatures are
swapped on the display .
Step 2. Press SELECT to
accept the new heat mode .
The heat mode stops
flashing . If the AWRT10RF
Thermostat is setup as
programmable, the current
time & date will be displayed
as well as the schedule icon .
Step 2. Press the
or
keys to adjust the target
setpoint . The new setpoint
will take affect once the
display stops flashing .
9 .1