Table of Contents
Advertisement
Section 4
Step 3. Press and hold the pair button for 10 seconds to enter pairing mode on each actuator
to be connected .
Step 4. Use the
and
AWRT10RF Thermostat to switch from
RLAY_CTL to RDTR_VLV . Press SELECT
to initiate pairing .
AWRT10RF Pairing with
Internet Connection (SG888ZB Gateway)
10 seconds
keys on the
Once the AWRT10RF Thermostat joins a network, the
flashing and the network channel will be briefly displayed . After that,
PAIRING- - - is displayed with a 10-minute countdown timer showing
the time allowed for the remaining pairing steps .
The LED indicator will flash red.
JOINING- - - is displayed with a 10 minute
countdown timer to show the remaining
time available to complete the next steps .
The
icon will flash at the bottom of the
screen indicating that the thermostat is
searching for a network to join .
icon will stop
4 .6
Hide quick links:
Advertisement
Table of Contents
