Resetting The Ax10Rf Receiver - Salus AX10RF System Manual

Section 7

Resetting the AX10RF Receiver

The AX10RF Receiver has 2 reset buttons on the
bottom surface of the unit cover. The right button
is for the receiver and the left is for the system.
1 . Using a small stiff wire, press and hold the right
reset button until the red auto/manual backlight
LED flashes .
2 . Using the same probe, press and hold the left reset button until the red auto/manual backlight
LED and the green on/off backlight LED flash alternately .
3 . To complete the reset, cycle the power to the AX10RF Receiver off for 10 seconds .
To reset the AX10RF Receiver, delete the icon from the SALUS Smart Home mobile application in the
same way as the Wiring Centers:
1 . Select the menu from the
upper right of the home screen .
4 . Choose the appropriate
Wiring Center from the list .
7 . Once the AKL Wiring Center is removed, be sure to cycle off the power for more than 10 seconds
to fully reset the unit .
Resetting Factory Defaults
without Internet Connection
with Internet Connection
2 . Choose "Equipment"
5 . Scroll to the bottom of
the screen .
3 . Then choose, "All equipment"
6 . Select "Remove Wiring Center" .
7 .5