Salus AX10RF System Manual page 33

Section 4
Once the AWRT10RF Thermostat
joins a network, the
stop flashing and the network
channel will be displayed briefly .
The home screen will show
PAIRING- - - with a 10-Minute
countdown timer as the
AWRT10RF Thermostat looks for
an RX2 device .
AWRT10RF Pairing with
Internet Connection (SG888ZB Gateway)
The red LED backlight on the Auto/
Manual Switch will turn steady on .
After pairing is complete,
icon will a confirmation screen
is displayed on the
AWRT10RF Thermostat
for 3 seconds, then the
device will enter the
parameter setup mode .
Auto Manual
On Off
The thermostat display
will show PAIR: RCV2 with
P 01 indicating it is in the
parameter setup mode .
Cn (Connected) indicates
that the AX10RF Receiver is
paired and connected .
4 .13