Modbus Register Table; Specifications - Banner SureCross DX80 GatewayPro Series Quick Start Manual

SureCross DX80 GatewayPro
LED 1
(flashing red)
For Gateway and Ethernet Bridge systems, active Modbus communication refers to the communication between the Gateway and the
Ethernet Bridge. For GatewayPro systems, the Modbus communication LEDs refer to the communication internal to the GatewayPro. For
Gateway only systems, the Modbus communication LEDs refer to the communication between the Gateway and its host system (if appli-
cable).

Modbus Register Table

I/O Point
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Specifications

Range
900 MHz: Up to 4.8 kilometers (3 miles)
2.4 GHz: Up to 3.2 kilometers (2 miles)
Transmit Power
900 MHz: 21 dBm (150 mW) conducted
2.4 GHz: 18 dBm (65 mW) conducted, less than or
equal to 20 dBm (100 mW) EIRP
P/N 131933 Rev. F
LED 2
(flashing red)
(flashing yellow)
(flashing red)
Gateway
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Radio and General
www.bannerengineering.com - tel: 763-544-3164
Gateway Status
Device Error
Modbus Communication Active
Modbus Communication Error
Modbus Holding Register
Any Node
1 + (Node# × 16)
2 + (Node# × 16)
3 + (Node# × 16)
4 + (Node# × 16)
5 + (Node# × 16)
6 + (Node# × 16)
7 + (Node# × 16)
8 + (Node# × 16)
9 + (Node# × 16)
10 + (Node# × 16)
11 + (Node# × 16)
12 + (Node# × 16)
13 + (Node# × 16)
14 + (Node# × 16)
15 + (Node# × 16)
16 + (Node# × 16)
Power
Requirements: +10 to 30V dc (Outside the USA: +12 to
24V dc, ±10%). (See UL section below for any applica-
ble UL specifications)
Consumption: Less than 2.9 W (120 mA) at 24V dc
5