GEIGER SOLIDline GU4506 Original Assembly And Operating Instructions page 11

Activating the GEIGER-Powertronic
1. At close range, press the 'Up' or 'Down' button and
hold approx. 3 seconds until you hear the motor (1 x
'Click-Click').
2. From far range, press the 'Up' or 'Down' button and
hold approx. 1 second until you hear the motor (1 x
'Click-Click').
3. At close range, press the 'Up' or 'Down' button and
hold approx. 3 seconds until you hear the motor (1 x
'Click-Click').
4. Now the power can be incrementally increased with the
'Up' button and incrementally reduced with the 'Down'
button.
5. When the desired power level is reached, at close range,
press the 'Up' or 'Down' button and hold approx. 1 se-
cond. The motor is now in its normal operating mode.
(1 x 'Click-Click').
I
As soon as the lowest or highest power
level has been reached and you try to
continue to raise or lower the level, you
will hear a signal from the motor (2 x
'Click-Click').
Should there be no activity for 60 seconds, input mode will
be deactivated. The power level set will be assumed!
www.geiger.de
click-
1 x
click
max.
15 cm
click-
1 x
click
min.
1,5 m
click-
1 x
click
max.
15 cm
EN
11
EN