GEIGER SOLIDline-MOR GU4510 Operating Instructions Manual
For rolling shutters, awnings and scree
Hide thumbs
Also See for SOLIDline-MOR GU4510:
- Original assembly and operating instructions (16 pages) ,
- Operating instructions manual (12 pages) ,
- Operating instructions manual (8 pages)
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GEIGER SOLIDline-MOR GU4510
Summary of Contents for GEIGER SOLIDline-MOR GU4510
- Page 1 Tubular motor: GEIGER-SOLIDline-MOR Motor control: GEIGER-Spindle for rolling shutters, awnings and screens Bedienungsanleitung Operating Instructions Manuel d’utilisation Istruzioni per l’uso www.geiger.de...
-
Page 2: Table Of Contents
Storage temperature/ T = -15°C .. +70°C / dry and non-condensing place Humidity Subject to technical modifications. Please find information to the ambient temperature range of our GEIGER motors under www.geiger.de Gerhard Geiger GmbH & Co. KG | 100W1502 V000 0519... -
Page 3: General Information
1. General information Dear customer, By purchasing a GEIGER tubular motor you have decided on a quality product from GEIGER. Thank you very much for your decision and the confidence placed in us. Before you put this drive into operation please observe the following safety information. -
Page 4: Intended Use
If the tubular motors are used for other applications and/or modifications are performed to the tubular motors, which have not been discussed with GEIGER Antriebstechnik, then the manufacturer is not liable for personal injury and/or damage to property and for consequential damage. -
Page 5: Installation Instructions
Allen screw. Fix the engine bearer to the awning. Following options are available: – Star-shaped engine bearer (M45F889) – Fixation plate (M45F395) Fix the motor together with the shaft on the engine bearer and secure. The GEIGER SOLIDline motor is suitable for shaft diameters from 50 mm! www.geiger.de... -
Page 6: Setting Of The End Stops
• Press the UP key until the hanging is above the selected end position. • Turn the setting screw a few turns in the direction opposite the PLUS direction and repeat the above procedure again. Gerhard Geiger GmbH & Co. KG | 100W1502 V000 0519... -
Page 7: Declaration Of Conformity
We herewith explicitly declare that this product complies with the essential require- ments and relevant directives. It is authorised for use in all EC member states and in Switzerland without any need of prior registration. The Declaration of Conformity concerning this product is available on our website: www.geiger.de. 8. Information for the specialist electrician Caution: Wrong installation and... - Page 8 They will be happy to assist you. Gerhard Geiger GmbH & Co. KG Schleifmühle 6 | D-74321 Bietigheim-Bissingen T +49 (0) 7142 9380 | F +49 (0) 7142 938 230 info@geiger.de | www.geiger.de Gerhard Geiger GmbH & Co. KG | 100W1502 V000 0519...
Need help?
Do you have a question about the SOLIDline-MOR GU4510 and is the answer not in the manual?
Questions and answers