GEIGER SOLIDline-KS GU45 Series Original Assembly And Operating Instructions
For rolling shutters, awnings and screens
Hide thumbs
Also See for SOLIDline-KS GU45 Series:
- Operating instructions manual (8 pages) ,
- Original assembly and operating instructions (56 pages) ,
- Original assembly and operating instructions (12 pages)
Table of Contents
Advertisement
Quick Links
Tubular motor:
GEIGER SOLIDline
Motor control:
GEIGER Touch (GU45...-M)
for rolling shutters, awnings and screens
Original-Montage- und
DE
Betriebsanleitung
Original assembly and
EN
operating instructions
Notice originale de montage
FR
et d'utilisation
Instrucciones originales de
ES
instalación y funcionamiento
Istruzioni originali di
IT
installazione e funzionamento
www.geiger.de
EN
1
EN
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GEIGER SOLIDline-KS GU45 Series
Summary of Contents for GEIGER SOLIDline-KS GU45 Series
- Page 1 Tubular motor: GEIGER SOLIDline Motor control: GEIGER Touch (GU45...-M) for rolling shutters, awnings and screens Original-Montage- und Betriebsanleitung Original assembly and operating instructions Notice originale de montage et d’utilisation Instrucciones originales de instalación y funcionamiento Istruzioni originali di installazione e funzionamento...
-
Page 2: Table Of Contents
1. General information Dear customer, By purchasing a GEIGER motor you have decided on a quality product from GEIGER. Thank you very much for your decision and the confidence placed in us. Before you put this drive into operation please observe the following safety instructions. It serves for the prevention of danger and for the avoidance of personal injury and damage to property. -
Page 3: Guarantee
GU 45 Motor control Motor head Torque in Nm Motor diameter GEIGER universal drive 4. Safety instructions ATTENTION: Important safety instructions. For personal safety, it is important to follow these instructions. Please keep these instructions for future reference. f Do not allow children to play with stationary controls. Keep remote controls away from children. -
Page 4: Safety Instructions For Assembly
A plug for the disconnection of the motor from the power supply must be accessible after installation. f Damaged connecting cables must be replaced by GEIGER connecting cables of the same type. f The device must be mounted as described in the installation instructions. Fixations shall not be made with adhesives since they are regarded as unreliable. -
Page 5: Installation Instructions
– Place the motor into the existing engine bearer and lock – Place the motor in a compatible engine bearer with clip system and lock with spring or rotating lever The GEIGER SOLIDline motor is suitable for shaft diameters from 50 mm! www.geiger.de... -
Page 6: Information For The Specialist Electrician
70°C. Connecting cables with plug connectors of the Hirschmann Company are tested and approved with couplings of the Hirschmann Company. Electronic / mechanical limit stop Gerhard Geiger GmbH & Co. KG | 100W0570 V000 0220... -
Page 7: Setting Of The End Stops
NOTE: If you want to readjust the end position, please move the rolling shutter in the opposite direction about 5 seconds (one tube rotation) before repeating the operation. There is no need to first delete the end stops (memorised) if you wish to modify them. It is possible to adjust an end stop without modifying the other ones. www.geiger.de... -
Page 8: What To Do If
• Adjusting knob not pressed properly. is not correct. Repeat adjustment process, press adjus- ting knob deeply. • Actuator does not rotate simultaneously. Push shaft onto tube actuator, repeat adjustment process. Gerhard Geiger GmbH & Co. KG | 100W0570 V000 0220... -
Page 9: Declaration Of Conformity
Gerhard Geiger GmbH & Co. KG Schleifmühle 6 | D-74321 Bietigheim-Bissingen Phone +49 (0) 7142 9380 | Fax +49 (0) 7142 938 230 | info@geiger.de | www.geiger.de Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRA 300591 | USt-IdNr. DE145002146 Komplementär: Geiger Verwaltungs-GmbH | Sitz Bietigheim-Bissingen | Amtsgericht Stuttgart HRB 300481 Geschäftsführer: Roland Kraus | WEEE-Reg.-Nr. -
Page 10: Technical Data
The average sound pressure level data are intended for guidance only. The values were determined by GEIGER at a distance of 1 m, with a hanging motor at idle speed and averaged over 10 seconds. There is no reference to any specific test standard. - Page 11 www.geiger.de...
- Page 12 They will be happy to assist you. Gerhard Geiger GmbH & Co. KG Schleifmühle 6 | D-74321 Bietigheim-Bissingen T +49 (0) 7142 9380 | F +49 (0) 7142 938 230 info@geiger.de | www.geiger.de Gerhard Geiger GmbH & Co. KG | 100W0570 V000 0220...
Need help?
Do you have a question about the SOLIDline-KS GU45 Series and is the answer not in the manual?
Questions and answers