Table of Contents
Advertisement
Installing the Power Supply and Cord
1. Insert the 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver unit, align the plug with the
notch above the POWER jack. Make sure the locking tab snaps securely into the
jack.
Locking
Tab
(FrameSaver 9124
Shown)
2. Plug the power cord into the grounded power outlet.
Verification Check:
-
Did any LEDs light?
– If yes, the FrameSaver unit has power.
– If no, refer to Troubleshooting Power and COM Port Connections on page 6.
POWER
COM
2.
DSX-1
NETWORK
Power Cord /
Transformer
3.
The front panel
OK LED lights.
4
Insert the 3-prong plug
into an ac outlet.
3-Prong
Grounded
AC Outlet
98-15823
Advertisement
Table of Contents
Troubleshooting
