Data Port Leds - Paradyne FrameSaver SLV Series Installation Instructions Manual

Data Port LEDs:

Label Indication
FrameSaver 9124, 9126, or 9128
OK Operational
Status
or
1-OK
2-OK
FrameSaver 9624
TXD Transmitted
Data
RXD Received Data
Color What It Means
Green ON – The interchange circuits for the port
OFF – The port is idle. Occurs if the port is
Green ON – Data sent from the DTE over
OFF – Data sent from the DTE over
Blinking ON and OFF ( Rate: 5 Hz ) –
Green ON – Data received by the DTE over
OFF – Data received by the DTE over
Blinking ON and OFF ( Rate: 5 Hz ) –
29
are in the correct state to transmit
and receive data.
disabled, or if the port is configured
to monitor DTR and/or RTS and the
lead(s) is not asserted.
interchange circuit BA (ITU 103) is
all 1's.
interchange circuit BA (ITU 103) is
all 0's.
Both 1's and 0's are being received
from the DTE; circuit state has
changed at least once during the
sampling interval.
interchange circuit BB (ITU 104) is
all 1's.
interchange circuit BB (ITU 104) is
all 0's.
Both 1's and 0's are being received
from the DTE; circuit state has
changed at least once during the
sampling interval.