Paradyne FrameSaver SLV Series Installation Instructions Manual page 37

Make the T1 network connection using a Universal Service Order Code (USOC) type
RJ48C jack for single-line installations and type RJ48H jack for multiline installations.
Specify both the Service Order Code 6.0F, as well as the proper Facility Interface
Code, to the telephone company when ordering the T1 line. The T1 equipment can be
configured to support any of the framing format and line signaling techniques shown in
the table below. The T1 equipment's configuration must correspond to the T1 line's
parameters.
T1 Facility Interface Codes
Interface Code
04DU9-BN
04DU9-DN
04DU9-1KN
04DU-1SN
Make the ISDN PRI connection using a USOC-type RJ48C jack. When ordering an
ISDN line from the telephone company, specify the following:
H
Service Order Code 6.0F
H
Facility Interface Code 04DU-1SN
H
Up to 23B Service for an ISDN PRI DBM – Supports up to 23 circuit-switched
B-channels, with one local phone number for the entire T1 network connection.
H
Circuit Switched Data capability should be specified.
Make the ISDN BRI connection using a USOC-type RJ49C jack. When ordering an
ISDN line from the telephone company, specify the following:
H
Facility Interface Code 02IS5
H
Calling Number Identification Service (CNIS) for both the originating and answering
units for data traffic on the B-channel.
H
Capability Package B for 1B-service or Capability Package ( I ) for 2B Service for
an ISDN BRI DBM – Supports up to two circuit-switched B-channels, BRI-B1 and
BRI-B2, each with one Service Profile Identification (SPID) number and one local
phone number.
H
Busy Fixed Call Forwarding for the answering unit (typically the central site unit) is
recommended if getting Capability Package I (2B service). This feature is only
required if all remote units will call the same phone number. Busy Fixed Call
Forwarding forwards a call to the BRI-B2 channel when the BRI-B1 channel is
busy.
Description
1.544 Mbps superframe format (SF) without line power
1.544 Mbps SF and B8ZS without line power
1.544 Mbps ANSI ESF without line power
1.544 Mbps ANSI ESF and B8ZS without line power
37