Daytime Running Lamps - Mitsubishi Outlander 2015 Owner's Manual

NOTE
l The lamp auto-cutout will not function when
the lamp switch is in the " " position.
l The lamp auto-cutout function can also be
disabled.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with MITSUBISHI
Multi-Communication System
screen operations can be used to make the
adjustment. Refer to the separate owner's
manual for details.
When you want to keep the
lamps on:
1. In the following cases, turn the lamp
switch to the "OFF" position.
[Except vehicles equipped with keyless
operation system]
The ignition switch is in the "LOCK" or
"ACC" position.
[For vehicles equipped with keyless op-
eration system]
The operation mode is in OFF or ACC.
2. Turn on the lamps with the switch in the
" " or " " position again, then the
lamps will remain on.
LED headlamp warning lamp*
This warning lamp will illuminate when there
is a fault in the LED headlamps.
Type 1
(MMCS),
Type 2
NOTE
l If the warning lamp illuminates, there may
be a fault on the unit. Have the vehicle
checked at a MITSUBISHI MOTORS Au-
thorized Service Point.
Lamp monitor buzzer
If the following operation is performed, a
buzzer will sound to remind the driver to turn
off the lamps.
Combination headlamps and dipper switch
[Except for vehicles equipped with keyless
operation system]
E00538101025
If the driver's door is opened when the key is
in the "LOCK" or "ACC" position or re-
moved from the ignition switch while the
lamps are on.
[For vehicles equipped with keyless opera-
tion system]
If the driver's door is opened when the opera-
tion mode is in ACC or OFF while the lamps
are on.
In both cases, the buzzer will automatically
stop if the auto-cutoff function is activated,
the lamp switch is turned off, or the door is
closed.

Daytime running lamps

The daytime running lamps come on when
the engine is running and the lamp switch is
in the "OFF" or "AUTO" position (for vehi-
cles equipped with the automatic lamp con-
trol) and the tail lamps are off.
E00506100621
OGFE16E1
E00530601141
Instruments and controls
5
5-57