Rear-View Camera - Mitsubishi Outlander 2015 Owner's Manual

NOTE
l The detection area will not change if you
keep the "SONAR" switch pushed for 10
seconds or more.
l After pushing the "SONAR" switch, revers-
ing sensor system operation differs accord-
ing to the detection area setting.
• Setting when towing bar is not equipped
When the gearshift lever or selector lever
is moved to the "R" position, the revers-
ing sensor system will operate even if cor-
ner sensor operation was stopped by push-
ing the "SONAR" switch.
• Setting when towing bar is equipped
When reversing sensor system operation
was stopped by pushing the "SONAR"
switch, the reversing sensor system will
not operate until the engine has been stop-
ped even if the gearshift lever or selector
lever is moved to the "R" position.
To resume reversing sensor system opera-
tion, push the "SONAR" switch or stop
and restart the engine, and then move the
gearshift lever or selector lever to the "R"
position.
Reversing sensor system warn-
ing display
In case there is a malfunction in the reversing
sensor system, the display for the malfunc-
tioning sensor will blink and the warning
buzzer will sound for approximately 5 sec-
onds.
Example: Corner sensor (left) malfunctioning
OGFE16E1
Even after the buzzer and display has stopped
warning, the indication lamp (A) on "SO-
NAR" switch will continue blinking until the
E00615901391
system reverts to the normal state. Have the
vehicle inspected
MOTORS Authorized Service Point.

Rear-view camera*

The rear-view camera is a system that shows
the view behind the vehicle on a screen of the
MITSUBISHI Multi Communication System
(MMCS) or the DISPLAY AUDIO.
Starting and driving
Rear-view camera*
at a MITSUBISHI
6
E00618401951
6-111