Towing - Mitsubishi Outlander 2015 Owner's Manual

Towing

NOTE
l Full wheel covers have a symbol mark (E)
provided on the reverse side to show the air
valve location.
Before installing the wheel cover to the
wheel, make sure that the opening with the
symbol mark is correctly aligned with the air
valve.
3. Push the underside (F) of the wheel cov-
er into the wheel.
4. Gently push both sides (G) of the wheel
cover and hold them in place with both
8
knees.
5. Gently tap around the circumference of
the wheel cover at the top (H), then push
the wheel cover into place.
8-14 For emergencies
Towing
If your vehicle needs to be tow-
ed
If towing is necessary, we recommend you to
have it done by your MITSUBISHI
MOTORS Authorized Service Point or a
commercial tow truck service.
In the following cases, transport the vehicle
using a tow truck.
l The engine runs but the vehicle does not
move or abnormal noise is produced.
l Inspection of the vehicle's underside re-
veals that oil or some other fluid is leak-
ing.
If a wheel gets stuck in a ditch, do not try to
tow the vehicle.
Please contact your MITSUBISHI MOTORS
Authorized Service Point or a commercial
tow truck service for assistance.
Only when you cannot receive a towing serv-
ice from a MITSUBISHI MOTORS Author-
ized Service Point or commercial tow truck
service, tow your vehicle carefully in accord-
ance with the instructions given in "Emer-
gency towing" in this part.
OGFE16E1
The regulations concerning towing may dif-
fer from country to country. It is recommen-
E00801505149
ded that you obey the regulations of the area
where you are driving your vehicle.
Do not tow 4WD vehicles, or 2WD vehicles
with CVT, with this style.
Do not tow 4WD vehicles with this style.