Mitsubishi Outlander 2015 Owner's Manual page 272

Adaptive Cruise Control System (ACC)*
NOTE
l The set speed is cancelled when the ACC is
turned off or the ignition switch or operation
mode is set to "OFF".
l If the ACC is in the 'ON state' when the ig-
nition switch or operation mode is set to
"OFF", the system is set to the 'OFF state'
when the ignition switch or operation mode
is set to "ON" next time.
6
To resume the control
After cancelling the ACC control (i.e. placing
the system in the 'standby state') by pressing
the "CANCEL" switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
"RES +" switch.
6-90 Starting and driving
NOTE
l The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
To change the following dis-
tance setting
Every time you press the following distance
setting switch, the setting changes sequential-
ly through three options "Long", "Middle"
E00638300050
and "Short", cycling back to "Long" after
"Short". The distance setting is reset when
the ignition switch or operation mode is set to
"OFF" or when ACC is set to "OFF," and is
automatically set to "long" when you set
ACC to "ON" next time.
OGFE16E1
NOTE
l The following distance varies as a function
of the speed; the faster is the speed, the lon-
ger becomes the distance.
Following distance setting: "Long"
E00638400035
Following distance setting: "Middle"
Following distance setting: "Short"