Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Flooring
NOTICE: Adequate fl oor support must be provided. Consult the "Rough-In Information" section for specifi c fl oor
loading requirements.
Install adequate fl oor support.
NOTICE: To ensure a successful installation, it is critical that bath be installed on a level subfl oor.
Verify the subfl oor is level. Adjust for level, if necessary.
Framing
CAUTION: Risk of property damage. Do not support the bath by the rim. The bath must be supported by
the support blocks only.
NOTICE: To ensure the bath does not rest on the rim, a 1/16" (2 mm) gap must exist between the framing and
the underside of the rim. When constructing the framing, take into account the gap and the thickness of the
fi nished wall/deck material.
NOTICE: The bath is for drop-in or raised deck installations only. If a deck-mount faucet will be installed, plan a
space on the deck to accommodate the deck-mount faucet.
Construct the framing according to the "Rough-In Information" section of this publication. Ensure a
1/16" (2 mm) gap will exist between the framing and the underside of the rim.
Provide access panels as required to service the blower motor and control.
Plumbing
NOTICE: For through-the-fl oor drain installations: A drain hole will need to be cut to accommodate the drain
connections. Position the plumbing according to the "Rough-In Information" section of this publication.
Cap the supplies and check for leaks.
Attach the drain to the bath according to the drain manufacturer's instructions. Snug connections but do not
tighten. Do not connect the trap at this time.
Plan the drain connection to the trap.
1107630-2-C
8 of 28
1. PREPARE THE SITE
Provide clearance in this
area for the drain assembly.
60" x 32" Acrylic Air Bath
Provide a 1/16" (2 mm)
gap between the bath
rim and the framing.
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Advertisement
Table of Contents
