Table of Contents
Advertisement
INSTALLATION
A. Installation of In-wall Tank
1.
Fix the fixing cap into the holes of fixing frame, then
tighten the hexagonal screws on the fixing frame
with hex pan as shown in Fig. A.
Tighten the bolts with medium Allen key as shown
in Fig. B, adjust the height of the adjustable bracket in
compliance with customer's requirements, and then
tighten the nut with hex pan.
2.
Based on the frame, fixed the location of adjustable
bracket and Fixing Frame, then remove the frame, Drill
four holes with diameter of 10.5mm and depth of 60mm
with churn drilling as shown, and fill in the holes with
bulge screw and tighten the long screw, then install the
Fixing Frame and tighten the spring gasket and gasket.
1104563-T01-C
A. 自动感应入墙式隐藏水箱的安装
1.
如图A将内六角螺丝连同固定套装在水箱架小孔内。然后将
螺母紧锁在内六角螺丝上,再用内六角扳手把内六角螺丝拧
紧在水箱架上。
如图B用内六角扳手拧松螺母，使可调支架可以按照客户的
理想高度进行调节，调节到合适位置后再用内六角扳手拧紧
螺母。
Fixing Frame
固定架
Nut
螺母
Fixing Cap
固定套
Hexagonal Screw
内六角螺丝
Tank Frame
水箱架
A
2. 依据水箱架比对好固定架和可调支架的位置，移开水箱架
如图在墙上合适位置用冲击钻钻四个 10.5mm深60mm的
Bulge Screw
膨胀螺钉
Gasket
垫片
Spring Gasket
弹性垫片
Nut
螺母
-3-
Nut
螺母
B
Bulge Screw
膨胀螺钉
Hex Pan
内六角扳手
Adjustable Bracket
可调支架
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
