Table of Contents
Advertisement
4. 48mm-58mm of the long screw shall be reserved outside
the wall as shown in the illustration. If the long screw
outside the wall is not long enough or much longer than
that needed, it should be adjusted with screwdriver or by
hand. Then apply lubricant to drainage pipe and limber
pipe to ensure a smooth installation.
. 4
5. Install the toilet as shown in the illustration, and use a
spirit level to ensure the lavatory to remain level.
5.
6. Install the r
eversed lock,
nut and decoration cap onto long screw according to the
order shown in the illustration.
6.
4
8
m
m
5 -
rubber cover, gasket, hexagonal
8
m
m
-8-
48mm-58mm
Lubricant
Long Screw
Reversed Lock
Rubber Cover
Hexagonal Nut
Decoration Cap
Long Screw
Spirit Level
Gasket
1104563-T01-C
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
