Complete The Installation - Kohler K-1223 Installation Manual

Silicone Adhesive
Vinyl Trim
Strip
Nailing-In
Flange
Panel
2. Attach the Apron
Apply a thin continuous bead of silicone sealant (provided) onto the top of the vinyl strip. See
illustration.
Apply the vinyl trim strip to the underside of the bath rim. Make sure the lip of the trim strip fits
snugly against the entire length of the rim.
Immediately wipe away any excess sealant.
Tilt the panel, then carefully slip the panel into the groove on the underside of the rim.
Temporarily tack a nail into the top hole on each of the side of the panel. Ensure that the panel is
positioned as close to the rim as possible.
Square the panel to the rim.
Secure the nailing-in flange to the stud wall with screws or galvanized nails.

3. Complete the Installation

Install the finished wall covering and flooring.
Clean up with a non-abrasive cleaner.
1023728-2-B
Bath
4
Side View Cut Away
Rim
Vinyl Trim
Strip
Apron
Kohler Co.