Faucet Installation - Kohler Intrepid K-7499 Installation Manual

Undercover
Plumbers
Putty
Lavatory

1. Faucet Installation

Clean the lavatory surface to remove any grease, oil or debris.
Install the undercover to the bottom of the faucet body.
Apply plumbers putty or other sealant around the underside of
the faucet undercover according to the manufacturer's
instructions.
Insert the faucet through the lavatory holes.
From under the lavatory, install the toggle bars, spacers (if
needed) and nuts to the threaded posts. Hand-tighten the nuts.
Check the faucet alignment and carefully tighten the nuts until
secure. Do not wrench tighten.
Wipe away any excess sealant.
2. Choose Drain Type
Install the drain at this time according to the instructions packed
with the drain.
Kohler Co.
Faucet
Post
Toggle
Bar
Spacer
Nut
3 1031175-2-A