Kohler HYDRO-TOWER 100 K-6281T-NA Installation Instructions Manual page 12

5. Take motor wire out of the soft belt, release the two screws
that locked the box.
NOTE: Screws will not quit easily, just feeling that the screw
is threaded out is enough.
6. Catch the motor box under the edge ， press the motor box locker
with thumb, the motor box from the box seats will be out.
6. 抓住电机盒下边缘，用大拇指压出电机盒卡扣,将电机盒从机位上取出。
7. Unlock the long flush assy. and short flush assy., Lift and turn
backwards, and take them out.
7. 将左右两边的大冲拉杆组件和小冲拉杆组件从拉杆卡扣上拉起
并向后转，再从左右两边分别取出。
5. 将电机线从软扎线上取下,用螺丝刀松开两个锁电机盒
的螺丝。
注意：螺丝不会轻易退出，只要感觉螺丝拧出螺纹即可。
Lock
Long Flush Assy
拉杆卡扣
大冲拉杆组件
-12-
String
软扎线
Screw
螺丝
Motor Box
Locker
电机盒卡扣
Short Flush Assy
小冲拉杆组件
Lock
拉杆卡扣
1104563-T01-C