5. Install the fan assembly on top of the shoul-
der screws, and then secure it using the
three screws (7) for installing the fan.
C4342U206AA
6. Connect the fan connector to the Fiery con-
troller board.
C4342U207AA
Image Controller IC-401 (Interface Kit VI-501)
➁
8. Hook the two tabs at the back of the interface kit into the notches on the back of the
copier.
– 7 –
7. Install the interface kit cover, and then
secure it using the 16 screws (8).
Tighten the screw indicated by ➀ first, and
then tighten the screw indicated by ➁. The
remaining screws can be tightened in any
order.
➀
C4342U208AA
C4342U209AA