Advertisement
■ NetWare environment
Settings for NetWare printing
The controller supports the following NetWare environments.
NetWare Version
Service
Netware 4.X
PServer
Netware 5.X
PServer/
NDPSPrinter
Controller settings
(Select the necessary settings according to the user's environment.)
Network
Protocol Setup > IPX/SPX Setup IPX Auto Frame
Setup
Service Setup >
Enable Pserver
PServer Setup
NDS Setup
Bindery Setup
NetWare Server Poll Interval (sec)
Image Controller IC-401 (Interface Kit VI-501)
Settings That Must Be Specified From the
Controller Operation Screen
NDS, Pserver name, NDS context/Tree
NDS, Pserver name, NDS context/Tree (Only
LPR printing with TCP/IP is supported in
NDPS.
Specify the TCP/IP settings.)
Yes
Type
Frame Setup
Ethernet 802.2
Ethernet 802.3
Ethernet II
Ethernet SNAP
No
Enable NDS
No
Select NDS
Select the tree.
Navigate to the
Select the printer
Print Server
server.
Add File Server,
Select the tree.
Navigate to the
Select the printer
Print Server
server.
1-3600 [15]
PC Settings
1. Start up the Add Printer Wizard, and then select [Network Printer].
2. Display the printer on the network (click [Browse] for Windows 98 and Me, or click
[Next] for Windows 2000, XP and Server 2003), and then select the queue name
(name of NDPS Printer Agent for NDPS) for the printer registered with the server.
3. In the dialog where the manufacturer and model of the printer can be selected, click
[Have Disk].
4. Click [Browse], select the corresponding folder on the CD-ROM, and then click [OK].
5. Select the model of the printer from the printer list, and then click [Next].
6. Follow the instructions of the Add Printer Wizard to finish installing the driver.
– 20 –
Advertisement
