Advertisement
For Windows 2000, XP and Server 2003:
1. Display the printer properties.
2. Click the Ports tab, and then click [Add Port...]. The Printer Ports dialog appears.
3. From the Available port types list, select [Standard TCP/IP Port], and then click [New
Port...].
4. Type the IP address of the controller into the field.
5. Select [Custom], and then click [Setting].
6. Select [LPR].
7. Type [print] or [hold] into the field, and then click [OK].
8. Click [Next], then [Finish] to close the dialog.
■ IPP printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
Network Setup
Service Setup >
IPP Setup
PC Settings
1. Start up the Add Printer Wizard, and then select [Network Printer].
2. In the Locate Your Printer dialog, select [Connect to a printer on the Internet or on your
intranet].
3. Type [http://printer_IP_address/ipp/print] into the URL field.
4. In the dialog where the manufacturer and model of the printer can be selected, click
[Have Disk].
5. Click [Browse], select the corresponding folder on the CD-ROM, and then click [OK].
6. Select the model of the printer from the printer list, and then click [Next].
7. Click [Finish] to exit the Add Printer Wizard.
8. Specify the printer name and whether the printer will be the default printer and
whether a test print will be printed.
Image Controller IC-401 (Interface Kit VI-501)
Enable IPP
Yes/No [Yes]
■ Network Printing on a Macintosh Computer
Mac OS 8.6 - 9.2 AppleTalk printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
Network Setup
Protocol Setup >
AppleTalk Setup
Settings for a Macintosh computer
1. Double-click the AdobePS Installer icon.
2. After installation is finished, restart the computer.
3. Select Chooser from the Apple menu.
4. Click the AdobePS icon. (Make sure that AppleTalk is set to [Active].)
5. If zones are listed, select the correct AppleTalk zone.
6. From the Select a PostScript Printer list, select the type of connection used by the
controller, and then click [Create].
7. Select the PPD file for the model of the printer that was installed, and then click [OK].
8. Close the Chooser.
Mac OS X, 10.2.4 or later (native mode)
To install the PPD file for Mac OS X, 10.2.4 or later (native mode)
1. Quit all open applications.
2. Make sure that Print Center is not running on your computer.
3. Insert the User Software CD into the CD-ROM drive.
4. Open the Print Driver folder inside the OS X folder on the User Software CD.
5. Double-click the PPD Installer icon to start installing the printer description files.
6. Follow the on-screen instructions.
– 18 –
Enable AppleTalk
Yes/No [Yes]
AppleTalk Zone
Select the zone from
the list.
Advertisement
