Advertisement
7. Installing the Patch Files
■ Objective
The controller is recognized as KONICA MINOLTA printer in a network management tool
(EX. PageScope Net Care) at the time of use. In addition, the KONICA MINOLTA logo
appears at the top of the PageScope Web Connection page.
NOTE
This patch file is not provided on the CD-ROM supplied with the controller; it must be
acquired separately.
■ Patch file installation procedure
1. Check that the computer can communicate with the controller through TCP/IP.
2. Install the Command Work Station Utility from the CD-ROM included with the Fiery
controller on the computer.
NOTE
This software can only be used with the Windows operating system.
3. Start up the Command Work Station.
4. Select the controller from Available Servers, and then click [Add].
5. Log-in with administrator authorization.
6. Select the Job from Import in the File Menu.
7. In the Select File to Import dialog, select the patch file, select [22 C-KM] in the Logical
Printer, and then click [Import].
8. In order to apply the patch file settings, the controller must be rebooted manually.
After waiting 60 seconds or more, restart the controller.
9. When PageScope Web Connection is accessed, check that the KONICA MINOLTA
logo appears on the page, as shown below.
To access PageScope Web Connection:
Enter the IP address of your controller into the Address box of the Web browser.
(Example) http://192.168.0.200/
Image Controller IC-401 (Interface Kit VI-501)
The PageScope Web Connection page appears as shown below.
– 13 –
Before installing the patch file
C4342P223CA
After installing the patch file
C4342P238CA
Advertisement
