Ckn Clamp - Konica Minolta IC-401 Installation Manual

Image Controller IC-401 (Interface Kit VI-501)
.
14. Connect the printer cable to the copier. 16. Use one screw (7) to attach the plate to the
standard printer controller network port
C4342U213AA C4342U232AA
15. Attach a CKN clamp at the lower-left corner of the interface kit, and then pass the
printer cable though the clamp. Attach a CKN clamp to the right side of the interface
kit, and then pass the power cord through the clamp.
C4342U214AA
C4342U215AA
– 9 –