Advertisement
9. Secure the interface kit with the two screws
(8) for installing the controller.
C4342U210AA
10. Connect the controller power cord to the
copier.
C4342U211AA
11. Install the power cord cover, and then
secure it using the 2 screws (9) for installing
the power cord cover.
C4342U212AA
Image Controller IC-401 (Interface Kit VI-501)
– 8 –
12. Remove the screw on the rear cover of the
copier and the screw on the plate at the
back of the cassette.
C4342U242AB
13. Use the removed screw to attach one end
(larger end) of the harness to the plate at
the back of the cassette. Attach the other
end (smaller end) of the harness to the rear
cover of the copier.
C4342U243AA
Advertisement
