Advertisement
■ SMB printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
Network Setup
Protocol Setup >
TCP/IP Setup >
Ethernet Setup
Service Setup >
Windows Setup
PC Settings
• From the window displayed by clicking the Start button, pointing to [Settings], then
clicking [Printers], select the printer. Then, from the menu that appears by right-click-
ing the printer, click [Properties].
For Windows 98 and Me:
1. Click the Details tab, and then click [Add Port...].
2. Select [Network], and then click [Browse...].
3. From the console tree showing the network configuration, select the printer with the
server name registered in the controller.
4. Click [Close] to close the dialog.
For Windows NT 4.0, 2000, XP and Server 2003:
1. Click the Ports tab, click [Add Port], double-click [Local Port], and then type in
[\\server_name\print].
2. Click [Close] to close the dialog.
Image Controller IC-401 (Interface Kit VI-501)
TCP/IP-Ethernet
Yes/No [Yes]
Enable AutoIP Config
Yes/No [Yes]
IP Address
Enter the IP address.
Subnet Mask
Enter the subnet mask.
Gateway Address
Enter the IP address of
the gateway.
Enable Windows Print-
Yes/No [No]
ing
Point and Print Drivers
PS/PCL [PS]
Choose Domain
Select from list/Enter
manually [Select from
list]
■ LPD (LPR) printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
Network Setup
Protocol Setup >
TCP/IP Setup >
Ethernet Setup
Service Setup >
LPD Setup
PC Settings
For Windows NT 4.0:
1. Install the Microsoft TCP/IP Printing service.
• Open Control Panel, and then double-click the Network icon.
• In the Network dialog, click the Services tab, and then click [Add...].
• Select [Microsoft TCP/IP Printing], and then click [OK].
2. Display the printer properties.
3. Click the Ports tab, and then click [Add Port...]. The Printer Ports dialog appears.
4. From the Available Printer Ports, select [LPR Port], and then click [New Ports].
5. In the Add LPR Compatible Printer dialog, type the IP address of the controller into the
Name or address of server providing lpd field.
6. Type [print] or [hold] into the Name of printer or print queue on that server field.
7. Specify the printer name and whether the printer will be the default printer and
whether a test print will be printed.
8. Click [Close] to close the dialog.
– 17 –
TCP/IP-Ethernet
Yes/No [Yes]
Enable AutoIP Config
Yes/No [Yes]
IP Address
Enter the IP address.
Subnet Mask
Enter the subnet mask.
Gateway Address
Enter the IP address of
the gateway.
Enable LPD
Yes/No [Yes]
Advertisement
