Optional) Connecting The Peripheral Network Cable - Huawei SmartACU2000D Series User Manual

SmartACU2000D Smart Array Controller
User Manual (with No PID Module)
Figure 5-19 Connecting RS485 communications cables
----End

5.9 (Optional) Connecting the Peripheral Network Cable

Connect peripheral network cables to ports FE2 to FE5 on the Ethernet switch. All network
cables can be connected in the same way.
Step 1 Prepare a network cable.
Figure 5-20 Wiring sequence of an RJ45 connector
(1) White-and-orange
(5) White-and-blue
Step 2 Connect the peripheral network cable to the FE2 port on the Ethernet switch.
Step 3 Bind the network cable.
Issue 01 (2020-02-14)
Verify that the network cable functions properly using a network cable tester.
Copyright © Huawei Technologies Co., Ltd.
(2) Orange (3) White-and-green
(6) Green (7) White-and-brown
5 Electrical Connections
(4) Blue
(8) Brown
63