Huawei SmartACU2000D Series User Manual page 63

With no pid module

Hide thumbs Also See for SmartACU2000D Series:

Table of Contents

SmartACU2000D Smart Array Controller

User Manual (with No PID Module)

Figure 5-9 Removing a fastener

Step 3 Connect one end of the optical jumper to the fiber adapter.

Step 4 Route the other end of the optical jumper through the cable hole on the side of the ATB, and

connect the cable to the ATB.

Step 5 Connect the peripheral optical cable to the ATB, splice the optical cable and the optical

jumper, and wind the spliced cable around the fiber spool on the ATB.

Only professionals are allowed to splice fibers.

Figure 5-10 Connecting optical cables

Step 6 Check that the cables are connected correctly and securely. Then reinstall the optical cable

fastener and external mechanical parts.

Issue 01 (2020-02-14)

5 Electrical Connections

Table of Contents

Show Quick Links

Table of Contents

Smartacu2000d-d-00 Smartacu2000d-d-02 Smartacu2000d-d-05cn