SmartACU2000D Smart Array Controller
User Manual (with No PID Module)
Figure 4-11 Installing a SmartModule
Step 5 Connect the GE4 port on the SmartModule to the LAN port on the SmartLogger using the
network cable delivered with the SmartModule.
Step 6 Connect the preinstalled RS485 cable to the COM port on the SmartLogger based on the
label.
Step 7 Connect the preinstalled power cable to the 12V 1A port on the SmartModule based on the
cable label.
Figure 4-12 Connecting a cable
----End
Issue 01 (2020-02-14)
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
43