Cables And Connectors; Connector Specifications; 10/100/1000 Ports; Sfp Module Connectors - Cisco Catalyst IE9300 Hardware Installation Manual

Cables and Connectors

•
•

Connector Specifications

10/100/1000 Ports

The 10/100/1000 Ethernet ports on the switches use RJ-45 connectors.
Figure 34: 10/100/1000 Port Pinouts
Note

SFP Module Connectors

The illustration below shows an LC style connector that is used with the SFP Module slots. It is a fiber-optic
cable connector.
Connector Specifications, on page 69
Cables and Adapters, on page 71
Connector pins 1, 2, 3, and 6 are used for PoE.
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
7
C H A P T E R
69