Cables And Adapters; Transceiver Module Network Cables; Cable Pinouts - Cisco Catalyst 9500 Series Hardware Installation Manual

Hide thumbs Also See for Catalyst 9500 Series:
Table of Contents

Advertisement

Connector and Cable Specifications
Figure 55: USB Type A to Type C Cable
The USB-C console port uses a USB Type A to Type C cable for console connections.

Cables and Adapters

Transceiver Module Network Cables

For cabling specifications, refer to the following notes:
Each port must match the wavelength specifications on the other end of the cable, and the cable must not
exceed the stipulated cable length. Copper 1000BASE-T SFP module transceivers use standard four twisted-pair,
Category 5 cable at lengths up to 328 feet (100 meters).

Cable Pinouts

Figure 56: Four Twisted-Pair Straight-Through Cable Schematic
Cisco SFP and SFP+ Transceiver Module Installation Notes
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation Note
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
Cables and Adapters
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

C9500x-28c8dC9500x-60l4d

Table of Contents